Environmental Analysers
Using a variety of Technologies, we can measure most gases and liquids typically required by environmental agencies. These include typical gases such as CO2, CO, SO2, SOX, NO, NO2 & NOX and many more. Teledyne’s oil in water 6000 series (168kb)*, levels as low as 1ppm are possible. These are gaining great success in offshore applications and are now available in an ATEX format.
300L - Laser Backscatter Particulate Monitor
The Laser Backscatter Particulate Monitor provides reliable, continuous, non-extractive particulate monitoring ideal for the utility, paper, pulp, chemical and petrochemical industries for use in manufacturing, process and combustion operations.
Click here for brochure (1.1 mb)*
LGA 3500 - Tunable Laser Diode Array Spectrometer (TLDAS)
The LGA-3500 is an in-situ, cross stack Tunable Laser Diode Array Spectrometer (TLDAS) capable of detecting a number of compounds, such as O2, CO, CO2, within a combustion process. The LGA-3500 provides an instantaneous response to process changes, has no moving parts, no cross interference from other gases, and eliminates the need for a costly extractive sample preconditioning system. The rugged design and air purge applied on the optical windows of the laser transmitter and receiver units makes the LGA-3500 easy to maintain and leads to a low cost of ownership. Configurations suitable for hazardous areas are also available.
Click here for brochure (297kb)*
9060 - Zirconium Oxide Flue Gas Oxygen Analyzer
Optimizing combustion efficiency and minimizing exhaust emissions are important for proper operation of nearly every industrial process that burns fuel. From clean burning natural gas to dirty coal fired kilns, Teledyne’s odel 9060 provides reliable and efficient O2 monitoring capabilities by combining field proven zirconium oxide sensor technology with a powerful and versatile microprocessor based controller.
Click here for brochure (272kb)*
9110EH - Chemiluminescent NO/NO2/NOx Analyzer
Teledyne’s Model 9110EH analyzer uses the field-proven chemiluminescent technique for monitoring high levels of oxides of nitrogen. User-selectable ranges of 0 - 5000 ppm make it ideal for a wide variety of applications including CEM, stack testing, cement kiln inlet for clinker quality control, and process control.
Click here for brochure (204kb)*
560 LightHawk - Opacity/Dust Monitor
The most stable, accurate and maintenance free EPA-compliant opacity monitor available under all operating conditions.
Click here for brochure (1.5mb)*
150 Ultraflow - Ultrasonic Gas & Temperature Monitor
The Ultraflow 150 is a patented advance in continuous flow measurement systems for small and large stacks and ducts. Transducers are non-intrusively mounted in Teflon housing and are protected from flue gas and particulate with continuous purge air. This non-contacting method mitigates maintenance and ensures long-term operation unlike intrusive pilots thermal systems, optical scintillation, and reflective ultrasonic technology.
Click here for brochure (1.4mb)*
1220 / 1220-3 Multi Point Flamable Gas Detection System
Teledyne’s Model 1220 microprocessor-controlled gas detection system is specifically designed to monitor industrial locations such as refineries and chemical plants, and warn of the presence of potentially explosive gases and vapors. In addition, the 1220 can activate ventilation or sprinkler systems or shut down process equipment until the danger is eliminated.
Click here for brochure (400kb)*
* You will need Adobe Acrobat to view this file.